Views: 51 Author: Site Editor Publish Time: 2022-09-23 Origin: Site
In our production and life, the conductive caster has a crucial impact on us, so what is the relevant information on the conductive caster? Let's see together.
Here is the content list:
How to improve the moving speed of casters
Ways to Extend the service life of casters
Maintenance of casters
1. Use high load-bearing casters, which can rotate flexibly and ensure the speed of natural rotation.
2. The choice of hardness, the conductive caster on the surface should not be too soft, too soft caster wheel will have larger friction with the ground, thus slowing down the running speed.
3. Choose a conductive caster with a large wheel, so that the distance of the caster is large and the natural speed is faster than that of the small caster.
4. Lubricating oil to the running part of the heavy-duty castor wheel to ensure the flexibility of the rotating part of the caster and help to increase the rotation speed.
1. The special properties of casters should be selected under high-temperature conditions.
2. Check whether there is foreign matter on the surface of the wheel.
3. The material of a conductive caster is different. Wheels of different materials are used in different environments.
4. Avoid the conductive caster operating at a high speed, which is easy to damage the wheel surface and the support of the caster.
5. Avoid loosening the conductive caster, so that the brake is not loose, and the caster is worn more seriously.
6. Each wheel has the maximum bearing capacity and impact load and must be used within the rated range.
7. In special operations, conductive casters are often in contact with corrosive substances, and casters are used according to the specific use of the wheel.
1. Wheel
Visual inspection of conductive caster wear. Poor wheel rotation is related to small red ropes and other debris. Covers can hide these entanglements of debris. Loosening or tightening casters is another factor, replacing damaged wheels/casters to avoid erratic rotation. Inspection, replacement, lock washers, and nuts of rear wheels must ensure that they are tightened with the wheel axle. Looseness of the shaft can cause friction between the conductive caster and the bracket and die. Casters and bearings should be replaced to avoid production losses.
2. Casters
If the steering is too loose, it should be replaced immediately. If the center rivet is attached to the nut, it must be locked firmly. If the rotation does not turn freely, the ball should be inspected for corrosion or dirt. If the fixed Heavy duty caster wheel is assembled, the bending of the scaffold cannot be guaranteed.
3. Lubrication
With the addition of ordinary oil, conductive casters and movable bearings can be used for a long time. Grease is suitable for friction parts of axles, seal rings, and roller bearings, reducing friction and making rotation more flexible. Normally lubricate every six months.
4. Supports and Fasteners
Tighten loose shafts and nuts and check for damage to welds or support plates. Overloading or impact can cause deformation of the conductive caster frame. Twisted braces allow weights to lean on individual wheels, causing premature wheel failure. If it is a plug-type continuous casting machine, the nut should be tightened or riveted firmly, the mounting bracket should not be bent, and the plug should be properly installed. When installing the conductive caster, either a lock nut or a loose nut should be used. The installation of the expansion plunger must ensure that the connecting rod is securely installed in the casing.
5. Overload
Overload is the main reason for the short life of conductive casters. Overloading will cause the deformation of the caster to affect the running track of the steel ball, and even if the support is too heavy to withstand the deformation and contact, the wheel gets stuck, resulting in the deformation, disintegration, and degumming of the wheel. So try to avoid overloading the casters and make sure to use them better within the range of use.
6. Use different wheels in different places
Different materials have different physicochemical properties for materials of different uses conductive casters of different materials are different, of course, the service life of casters is also different.
The above is the relevant information on conductive casters, if you are interested in a heavy-duty caster wheel, or conductive caster, you can contact us, our website is http://www.senocaster.com/.
